WallMonster Intensity Wall Mount Basketball Hoop - FT1660

The WallMonster Intensity adjustable wall-mount basketball goal from First Team is a cost-effective choice for your wall hoop needs. The built-in adjustable system can be managed from the ground with the removable crank handle provided and without a ladder. The WallMonster Intensity basketball hoop is extremely versatile because it can be installed as a 36" offset or a 48" offset. This hoop is the perfect option for a wide range of indoor or outdoor courts and locations. It features an all-steel construction and is powder coated for weather protection and a modern look. The rim height indicator is easy to read and quickly tells the user the rim height with ease.  For 48" offset installations, the rim height can be adjustable from 10' all the way down to 7 1/2'. For a 36" offset installation, the rim height can lower down to 6'. The WallMonster is made in the USA and has a lifetime limited warranty. Every First Team basketball goal is made in the USA with excellent quality and engineering. Your First Team basketball hoop will provide years of fun, competition, exercise and memories for your entire family. Product Submittal Diagram BACKBOARD DETAILS • 72” Wide x 42” High  • Perforated Aluminum backboard • No dead spots on backboard corners • Lifetime limited warranty • 400lbs approximate shipping weight GOAL SYSTEM DETAILS • FT1660 WallMonster Structure • Versatile installation as a 36" offset to 48" offset • Rim height adjustable from 6’ to 10’, depending on the width of offset • Built-in height adjustment system from ground level, no ladder needed • Backboard braces for superior backboard rigidity • Black powder coat finish • 4' extension setup; 10' rim height - 48" offset, 8' rim height - 51" offset • 3' extension setup; 10' rim height - 36" offset, 8' rim height - 50" offset • Heavy-duty direct mount flex rim eliminates backboard stress • Spring-aided easy adjustment • Made in the USA • Limited Lifetime Warranty WALL-MOUNT STRUCTURE All welded steel construction. Two ¼” thick wall struts are provided with four mounting holes per side for ease of attachment (hardware for attachment to wall not provided). These items shall be designed to be mounted to virtually any vertical wall surface. Attachment area required shall be approximately 28”x 46”. EXTENSION ARMS Adjustable extension arms are constructed of dual 2” x 2” tubing. A height adjustment crank cylinder is mounted within the extension arms and have a minimum 11,000# capacity rating. Four springs mounted in the extension assembly are included to minimize the amount of effort required to adjust the goal height when raising or lowering the unit. Design allows the rim to be mounted directly to the extension arm through the backboard to reduce stress on the backboard.  BACKBOARD Backboard is 42”x 72” rectangular steel. 11-gauge steel with ¼” thick vertical struts. Backboard has a white powder coat finish, and official orange shooter square.  RIM Standard rim is fabricated from 3/16” backplates and side plates fully welded. Rim is a double 5/8” diameter, high-strength steel welded together at a minimum of six places. Nets are attached by means of a continuous net locking system constructed of 3/16” x 1” steel with punched slots for the use of either nylon or chain nets (nylon net included). The entire rim is powder-coated orange. WARRANTY Structure, backboard, and standard rim carry a Lifetime Limited Warranty.